-
Hammer-on Beam Flange Clip with 1/4-20 Threaded Stud
Flange Clip(Hammer-on Beam Flange Clip with1/4-20 Threaded Stud)1. Application:These hammer-on beam clamps are used to suspend boxes, fixtures and bridle rings to beam flanges. 2.Advantages：Quick, hammer-on design eliminates the hardware costs and installation hours associated with traditional beam clamps. 3.Field Names:Multi purpose clamp, hammer on beam clamp, bang on beam clamp, multi purpose clip. 4.Material: Spring Steel Black Previous:Threaded rod hanger/hammer-on beam clamp assembly Next:Multi-function clip for plain or threaded rod -
Flange Clips
Flange Clips Application: Spring steel thread impression hammer on beam clamps are used to suspend boxes, fixtures and bridle rings to beam flanges. -
Spring Steel Beam Clamp-Light Duty
Spring Steel Beam Clamp-Light Duty Application:10-24 & 1/4-20 back and bottom with additional 3/8” clear hole, for lihgt-duty loads. Material: Spring Steel -
Pipe Sleeve Positioner
Pipe Sleeve Positioner Application: Used to position pipe sleeves and prevent movement during concrete pours. Material: Spring steel -
Strap Hanger for Angle Purlin
Strap Hanger for Angle Purlin Application: Strap Hanger for Angle Purlin. Compensates angle of purlin. Material: Steel -
MSR 90 Strap Hanger with Flange Clip
MSR 90 Strap Hanger with Flange Clip Feature： Supports pipe or duct from flange with banding or strapping.Pre-measure length of strap, hammer clip on to flange, then trapeze pipe or duct . Application: Suspends straps parallel to beams. Material: Steel -
Thread Install Rod Hanger
Thread Install Rod Hanger Application: Supports wire or rod from block or concrete walls. Material: Steel -
로드-앵글 도리 클립
Rod to Angle Purlin Clip Application:Used to support 1/4” and 3/8” threaded rod from purlin beam flanges 1/16” thru 1/4” thick. Material: Steel -
해머-나사형 로드가 있는 온빔 클램프
해머-스레드 로드가 있는 빔 클램프 적용: 해머 온 로드 행거/빔 클램프 어셈블리는 #8 와이어 또는 1/4인치 전체 스레드 로드를 오버헤드 마운팅에 매달고 1/4인치 볼트용 여유 구멍이 있는 데 사용됩니다. 재질:강철 -
스레드는 Angela Backet과 함께로드 행거를 설치합니다
스레드 설치로드 행거가 Angela Backet Application과 함께로드 행거 : 스레드로드지지 브래킷은 #8 와이어 및 1/4 "일반 또는 스레드로드를 목재 또는 금속 오버 헤드 구조 자재 : 강철로 사용합니다.
